Rusty railing, how to do it

Rusty railing, how to do it

Rusty railing, all instructions for a DIY restoration. Here's how to fix agateor onerailingaffected by therust

Painting a rusty railing

If thegatein question or therailingthey are completely covered withrust, you must quickly run for cover. The rust makes any gate unstable, especially if it is the railing of a balcony.

In case ofrustover an extended area, for a correct restoration you must necessarily perform a preliminary sanding. All instructions are contained in the guide articlePainting a rusty railing.

Rusty railing, how to do it

Before trying to remove the rust from the railing, you should undertake an action ofcleaning targeted.

Friable rust, as well as paint that peels up and flakes, must be removed before moving on to any product, including the latest rust converter. If you don't remove the flaking paint, the converter will not adhere to the metal and your work will be completely useless.

To do this, you can perform a smoothing as explained in the article mentioned above, or you can pass a wire brush. The iron brush must be passed with force and to finish you will have to pass a cloth soaked in white spirit. Radiant water is important for eliminating grease or dirt residues. Let it dry completely before applying any product.

Rust converter

The rust converter is a more recent product. It replaces the more well known enantirust. The rust inhibitor should be applied to a surface that is still intact and free from oxidation.

Therust converterit can be applied on rust but only when the substrate is compact and there is no flaking paint.

How does the rust converter work? Transforms existing rust into an inert element that will no longer attack the iron. In this way the iron will remain protected and can be repainted without additional treatments.

Antirust is a paint enriched with particular pigments and when purchasing you can choose only certain colors (usually red, brown, green and blue). After applying the converter, you can paint yoursrailingwith any kind ofenamel for iron.

Repair holes in a rusty railing

In case of holes in the ironof a gate or railing, you can perform a do-it-yourself repair using the putty for metals.

The putty that we find on the market is sold with aactivatorcalled "hardener". At the time of use, remove from the package only the amount of grout you intend to use in the most immediate future (within 10 minutes).

Start with the repair of a well-defined area. From the package, take only the part you intend to use and mix it with the dose of catalyst suggested on the label.

Any tool that comes into contact with the catalyst (activator or hardener) must not come into contact with the putty you are not using, otherwise it will become hard and unusable. If you accidentally get a tool dirty with catalyst to remove the grout from its package, immediately remove the layer that came into contact with the activator.

To spread the grout, use a spatula or a special knife. Once hardened, the filler can besandpaperand painted with the rest of the metal.

If thehole in the ironis it really small or is it a crack of a few millimeters, you can use a ready-to-use paste.

On the market there is no shortage of products born for small repairs. This is the case ofmetal repair paste.

There are many manufacturers who offer themetal paste. Among the various market proposals I point out thePattex repair paste, very good. I reported this product because I was able to use it personally to repair a hole in the lower part of thedeletedof my garden.

On Amazon this paste for metalyou buy with 12.97 euros and free shipping. For all the info:Pattex repair paste

Video: Time Lapse - Watching rust fall off using vinegar (October 2021).