Information

How to use silicone

How to use silicone

How to use silicone: how to proceed with the correct application of silicone to seal windows, shower boxes or to glue different materials.

Thesiliconeit is a very versatile material. It is an organic polymer composed of a silicon-oxygen chain and organic functional groups bonded to the same silicon atoms.

Thesilicone, in the home, it is very useful for"seal off"or "to join "two surfaces between them. It can be useful for sealing joints and / or for stopping the passage of fluids… There are many domestic applications. We can use silicone for:

  • repair or build a terrarium
  • repair build an aquarium
  • build or repair a greenhouse
  • stop drafts from windows
  • seal the shower cubicle and prevent leaks
  • repair leaks from the air conditioner
  • to fix a shelf to the wall
  • to glue a tile detached from the bathroom
  • to glue a tile detached from the bottom of the pool
  • other DIY applications

Thesiliconemost used in the home is the acetic one but based on the use we can use the polymer that best suits the needs of the case.

At home, we do not recommend the use ofsiliconeto repair glass mosaics, mirrors or other easily oxidizable materials. The use of silicone is also not recommended for particularly porous materials such as marble.

On the market it is possible to find white or transparent silicone. Silicone is generally repaintable. For most household chores, clear silicone is more suitable.

Among the various proposals on the market, we point out an offer from Amazon where a pack of 5 silicone sealant tubes is offered at a price of 13.39 euros with free shipping costs.

These tubes, equipped with a spout, can be applied using a common gun. The product indicated is a “universal” type silicone, therefore with acetic cross-linking and is compatible with all non-porous materials used in the home. It can be used on glass, ceramic, aluminum, steel, various plastics, wood and other painted substrates.

How to use silicone

Whatever use you intend to make of it, here are some simple rules to follow for correctapplication of silicone.

Before proceeding with the application of the silicone, carefully clean the surface. By cleaning we mean the removal of any material that may reduce the effectiveness of the sealant.

The surface, in fact, must be free of debris and dust. If necessary, remove the old putty or the old silicone; to remove the old filler and silicone you can use a spatula or a small knife following the instructions we have seen together in the guide: how to remove the silicone.

To avoid messes, protect the area adjacent to the application area by gluing adhesive paper tape. Leave free only the strip on which you are going to spread the silicone.

Warning!
To do this DIY job, put on a pair of rubber gloves!

The silicone cartridges are packaged in a tube with a spout to be screwed on once the tip is pierced. Cut off the tip of the cartridge and screw on the nozzle.

Mount the cartridge in the appropriatesilicone gun. Thanks to this gun you will be able to exert pressure on the rear plunger of the tube and apply the silicone optimally.

Operate the gun and direct the nozzle so as to distribute the insulation along the crack or along the area you intend to seal.

Thesiliconeit must be applied continuously. In case of smudges, help yourself with a finger but only after wearing rubber gloves.

If you have applied excess product, for remove the fresh silicone superfluous, use a damp cloth.

Once the work is finished, you must immediately remove the adhesive paper tape applied to delimit the work area. The adhesive tape must be removed before the silicone hardens.



Video: Why You NEED a HAAKAA Pump u0026 How To Use One! (September 2021).